Gearbest Banner

Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
Gallery / New Office Reno
« Last post by Soullessone21 on January 08, 2018, 07:06:37 AM »
So moved in over a month back and have been getting into the reno heavily the last few days.

Before I moved in:




Move in:




Now the changes are starting

(Above there is no power in my office yet so as you can see I ran the cords through the wall and same with my network cables :P


Cleared off above wall need to remove this wall completely to move it up a few feet


Put up the door "Kinda" its bolted in but not fitted yet and that wall has to come down so... a little bit of a waste of time but meh haha


Sadly the wall goes into another so it will need to be cut out and modified before moved but might have to pay someone to do this

Need to still get the new outlets and my Cat6 keystones and stuff that were ordered a year back from NCIX but guess since they went under I will have to go elsewhere.
  • Outlets
  • Insulation
  • Drywall
  • Green Glue
  • Resilent chambers
  • Resilent clips
  • Green Calking
  • The Wall moved

Once above is done I will them create a floating desk on 3 walls 1 for builds and a corner desk for my main rig
22
Everything Hardware / Re: ViewSonic VA2719-2K: cheap 1440p, worth it?
« Last post by Soullessone21 on January 07, 2018, 07:46:11 AM »
Yeah I donít get it. Every other monitor similar is quite a bit more $.

Tempted.

I have been oddly seeing some great lcds show up for cheap but most are openbox or refurbished. This still sounds like a good Deal. If you do get it keep us posted on how it is.
23
Everything Hardware / Re: ViewSonic VA2719-2K: cheap 1440p, worth it?
« Last post by Bond007 on January 07, 2018, 05:03:08 AM »
That actually does not look bad at all. I remember spending like $600 on a similar spec screen a few years back

Yeah I donít get it. Every other monitor similar is quite a bit more $.

Tempted.
24
Everything Hardware / Re: ViewSonic VA2719-2K: cheap 1440p, worth it?
« Last post by Soullessone21 on January 06, 2018, 01:15:02 PM »
That actually does not look bad at all. I remember spending like $600 on a similar spec screen a few years back
25
Everything Hardware / ViewSonic VA2719-2K: cheap 1440p, worth it?
« Last post by Bond007 on January 06, 2018, 05:30:50 AM »
I have been waiting forever for what I was considering a good bang for buck monitor (in my mind 1440p, 24ish inch, non-TN, >60hz and keeping cost down.

My wait has been futile. However, I have just stumbled on the VA2719-2K, and it hits most boxes...1440p, IPS, 27Ē (which I am ok with), and 60hz (though the minimal info I can find online has people OCing it to 75-80hz).

There are pretty much no reviews and minimal info available for it, but I can get it new for $300 out the door from a local store...seems crazy cheap. I am in Australia, but the $ is pretty much on par.

Thoughts?

https://www.mwave.com.au/product/vie...onitor-ac07244

https://www.viewsonic.com/us/va2719-2k-smhd.html
26
Everything Hardware / Re: Anyone know of a good case with a 420mm rad support?
« Last post by supaflyx3 on January 05, 2018, 05:46:47 PM »
That looks like almost the perfect case! How's the airflow compared to other phanteks enthoo cases? I've heard they have pretty bad airflow. Also the newegg description says it supports only 240s in the front, that's incorrect?
27
Guest and Other Site Reviews / Re: MSI GTX 1070 Ti Titanium review
« Last post by Soullessone21 on January 05, 2018, 03:27:23 PM »


MSIís version built around its ďGamingĒ PCB brings more to the table than your average GPU. A nice beefy 10 phase power delivery system built with Military Class components for durability and cooled by MSIís TwinFrozr VI cooling system. Pair that with MSIís AfterBurner software and you have a nice overclocking experience that wonít leave you disappointed. With the lower base clocks, it makes the overclocking potential much more impressive.

Here's a link to the new Nvidia 1070 Ti review

Thanks again for sharing your article feel free to share more if you would like
28
Everything Hardware / Re: Anyone know of a good case with a 420mm rad support?
« Last post by Soullessone21 on January 05, 2018, 12:31:12 PM »
thanks for the heads up, I will keep that in mind :)
29
Everything Hardware / Re: Anyone know of a good case with a 420mm rad support?
« Last post by Johan45 on January 05, 2018, 11:44:45 AM »
Keep an eye open. I got this last spring at Canada Computers on sale with tax $160.
Like I said really nice to work in
30
Everything Hardware / Re: Anyone know of a good case with a 420mm rad support?
« Last post by Soullessone21 on January 05, 2018, 10:33:24 AM »
Not the best pic but this is it. Ryzen build 1600X MSI Titanium board and that 1070TI with the alphacool eisbaer 420 in the top. It's a bit smudged but it's glass



Damn not bad at all, out of my budget but damn nice
Pages: 1 2 [3] 4 5 ... 10
SimplePortal 2.3.6 © 2008-2014, SimplePortal