Jump to content

Accelero III VS Kraken G12

Epic GPU Deal - Repairing and Upgrading Asus Strix Cards
Watch now

Arctic Z1 Gen 3 Review

The Z1 was a simple install and setup and works very nicely, the hub is simple but sleek and in all reality, Arctic did a great job.
Watch now

TRIBIT FLYBUDS Review

DURABILITY MEETS USABILITY
Read now

SILICON POWER BLAST PLUG BP82 Review

In either case we consider the Blast Plug BP82s to be a great addition to Silicon Powers current wireless earbud lineup.
Read now

Rugged BOSS SSD Review

The LaCie Rugged BOSS SSD in unabashedly focused on a very specific buyer: the professional.
Read now
News Ticker
  • Join us in our daily conversations to keep up with giveaways and reviews
  • RHR Forums
Sign in to follow this  
Johan45

A little Thread Ripper action.

Recommended Posts

Still, need to get a proper cooler instead of the Frankenstein I have done. It works but not like it should.Have managed 3.9 all cores @ 1.3V no throttling but hitting 80C. 3466 CL15 on the memory, I paired it up with an RX Vega64 currently.

alt textalt textalt textImage and video hosting by TinyPic" alt="alt text" />Image and video hosting by TinyPic" alt="alt text" />

Share this post


Link to post
Share on other sites

Will do, it'll be a while though. Hoping to use it as a test bed. Just have to convince AMD to give me some CPUs which so far has been dreadfully unsuccessful. I can tell you this much though, not sure if it was just because of the "used" part of the equation but this thing was a royal PITA to get up and running. I ended up RMAing the board but still had issues. Basically needed to hold my tongue just right, then try six times to get the CPU properly seated on the 4000+ pins so that all the memory would work. The previous owner had removed the CPU carrier for some reason, I got a replacement from the AMD rep but the CPU itself looked a bit roughed up on the edges of the PCB so the carrier was difficult to get re-attached. Now I know why I paid what I did for it. :relieved:

Share this post


Link to post
Share on other sites

@Johan45 said in A little Thread Ripper action.:

Will do, it'll be a while though. Hoping to use it as a test bed. Just have to convince AMD to give me some CPUs which so far has been dreadfully unsuccessful. I can tell you this much though, not sure if it was just because of the "used" part of the equation but this thing was a royal PITA to get up and running. I ended up RMAing the board but still had issues. Basically needed to hold my tongue just right, then try six times to get the CPU properly seated on the 4000+ pins so that all the memory would work. The previous owner had removed the CPU carrier for some reason, I got a replacement from the AMD rep but the CPU itself looked a bit roughed up on the edges of the PCB so the carrier was difficult to get re-attached. Now I know why I paid what I did for it. :relieved:

damn man that sounds crazy,I need it to handle lots of fast ram and many cores for 4k editing and some side gaming. goal is to do less gaming more reviews haha

Happy you found a few 4 leaf clovers to get it up and going

Share this post


Link to post
Share on other sites

It works fine now, just took a bit getting there. 3466 is likely as high as it's going to get 32GB in quad channel. Don't know if you're familiar with the X265 benchmark but it also has a 4K setting. I could run one of those if you like and post it. You could also run the same on your current system to see what the difference would be with 32 threads. Just DL from HWBot and needs HPET enabled

Share this post


Link to post
Share on other sites

@Johan45 said in A little Thread Ripper action.:

It works fine now, just took a bit getting there. 3466 is likely as high as it's going to get 32GB in quad channel. Don't know if you're familiar with the X265 benchmark but it also has a 4K setting. I could run one of those if you like and post it. You could also run the same on your current system to see what the difference would be with 32 threads. Just DL from HWBot and needs HPET enabled

Thanks would really appreciate that as even the lesser 1920x is on sale for super cheap right now

Share this post


Link to post
Share on other sites

Will do bud, give me a few hours. I almost bought a new 1950X when they were on sale for 999 but found this for a couple hundred more no tax so I had to take advantage. ROG Zenith, CPU and an Enermax 360 AIO TR4 something or other but it doesn't work I knew that. In contact with seller for POP so I can RMA it as well

Share this post


Link to post
Share on other sites

@Bond007 it's a bit of a learning curve but I like that. Not terrible just some differences from AM4.

@Soullessone21 here's the results of the 4K x265 benchmark, I managed to bump the processor up to 4.0 can't wait to get some better cooling on it

0_1540504693721_hwbot x265 4k 18.84.JPG

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...