Jump to content

Accelero III VS Kraken G12

Epic GPU Deal - Repairing and Upgrading Asus Strix Cards
Watch now

Arctic Z1 Gen 3 Review

The Z1 was a simple install and setup and works very nicely, the hub is simple but sleek and in all reality, Arctic did a great job.
Watch now

TRIBIT FLYBUDS Review

DURABILITY MEETS USABILITY
Read now

SILICON POWER BLAST PLUG BP82 Review

In either case we consider the Blast Plug BP82s to be a great addition to Silicon Powers current wireless earbud lineup.
Read now

Rugged BOSS SSD Review

The LaCie Rugged BOSS SSD in unabashedly focused on a very specific buyer: the professional.
Read now
News Ticker
  • Join us in our daily conversations to keep up with giveaways and reviews
  • RHR Forums
Sign in to follow this  
trodas

HWC team is asleep, what about to wake them up?

Recommended Posts

@Soullessone21:

That's a badass avatar and g777 is a great guy I have bought tons of gear from him :)

I would join you for ocing but I really need to hunt down 2 360 or 480 that are no taller then 124mm Daz sells them but scared of talking to my wife about buying computer gear hahahha

The part with your wife is really scary . I am in the same boat , plus i have to find a cheaper place to buy LN2 . 3$/L kills me any time when i fill up . Hopefully in the winter i will try to practice more

Share this post


Link to post
Share on other sites

Dead Things -

Ha ha, that 8088 got pwned! :o

Almost :) However any attempt to validate by CPU-Z is tiresome at best:http://youtube.com/watch?v=IsA0UtOXP_o

But I working my arse off on fixing this as well, as I can - keaboard controller mod - now it use own crystal, so it should not be dependent on the FSB clock. There you have few preliminary pics of the replacement:

the bigger blobs of tin on few of the lefgs (too big holes, tin get thru) will be fixed later :)

BTW, I think I know how to do BSEL = 0 on the board. The BSEL = 1 is triggered by connecting 10k resistor to +Vcc (3.5V). Disconecting it, soldering it into one leg, up into the air and connecting the high leg with ground force the BSEL = 0, according to this PDF guide:http://web.archive.org/web/20000919074447/http://www.icst.com/pdf/9169c-27.pdf

The BSEL = 0 thing will mean that the PCI clock will be locked at 32MHz regardless of FSB, except the 7.14MHz "thing" :) That should help a lot for overclocking!

Share this post


Link to post
Share on other sites

With new GFX card (ATI Rage XL PCI) the display is fixed at 7.14MHz FSB:

With the latest CPU-Z beta I get the validation of 10.7MHz: http://valid.x86.fr/1qbfwjso I submit the lowest CPU-Z score on HWbot: http://hwbot.org/submission/2987009_

...

Also I manage the Aquamark lowest score 2: http://hwbot.org/submission/2980283_ Witch is also unbeatable. Took me 3 days short of one MONTH ;D ;)

So to put long story short, I would once again stress that it might be worth that some of you, guys, who have quite powerfull hardware, could step it and just for the Teamcup 2015 join again HWC team on HWbot and try do some good scores ;) Just for few days - ending 30.9.2015.

The low scores I have pretty much covered (only the AMD lowest clock slipped out of my grasp, because I lack AMD K6 3+, witch have a software multiplier control, so I could set the 7.14MHz FSB to x2 multi, giving me a 14.28MHz - and hard to beat low clock score ;) ), but some fast scores could be helpfull to do.

Pretty please with suggar on the top?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...